Positive Notes

POSITIVE NOTES:
AMERICA’S BEST CONCRETE, INC. has supplied Polacrete™ for over 7,000 contractor jobs starting very slowly about fifteen years ago. Research and development took three years from 1990 - 1993. We have never had a contractor use Polacrete™ who wasn’t thrilled at the ease of application and the ability to raise low areas and edges to nothing with no release of Polacrete™ where standing water had been a problem before. We know that if you decide to purchase even the smallest package (Single Units) of Part A and Part B for about $97, not including your sand, which you purchase locally to save freight, your muriatic acid, T.S.P., tape and plastic, needed to protect paint, plaster, landscaping, etc. This size order will take care of normal repairs and resurfacing on 125+ sq.ft. area at approximately 1/8 in. thickness. If you need to raise an area for drainage purposes and to prevent standing water, then our smallest order will cover less area. To estimate the amount of extra material you will need, a good rule of thumb for raising a low area that has broken and settled is for every ¼ in. of fill you need to feather out 1 ft. So, for a 1 in. fill you would need to feather out 4 ft. to give your concrete the new, flat look you want. (Example: 10” wide 1” low equals 10’ X 4’ or 40 sq.ft. of extra area at ¼” thick or 80 sq.ft. of extra area at 1/8” thick.) Remember, all other products that claim to be a permanent fix for concrete with bad surface problems are only coatings applied with some form of adhesive that will, in time, dry out, causing delamination of whatever that surfacing product was. In fifteen years of using Polacrete™, we have never had a delamination problem. Our goal has always been from the beginning to develop and sell the best product at the lowest price. That is what we have accomplished with Polacrete™.

If contractors desire training for a specific territory under exclusive distributorship, you are welcome to e-mail us at info@concreterejuvenation.com, call us at 310-292-0275 or mail us at 1511 Cota Avenue, Long Beach, CA 90813. To become an exclusive distributor, you must meet the following qualifications:

Be in good standing with the Contractor’s State License Board
Provide ABC with a credit report
Provide ABC with a DMV check for last 5 yrs.
Provide ABC with a criminal background check

Application and authorization forms can be downloaded by clicking here . To order product, click here.

If you are accepted as a distributor, then all orders in your territory will be filled by you.

Distributor is a Contractor who is also willing to come to Long Beach, California, for intense training to ensure his success with Polacrete™. AMERICA’S BEST CONCRETE, INC. considers your training a test that must be passed along with a personal interview with Ed Mainus, President and inventor of Polacrete™. Mr. Mainus has been a successful franchiser of other products under the name of American Commerce Corporation, Inc. and sold 795 alternative energy franchises until December 31, 1985. Mr. Mainus is also the patent holder of Cool Wear Works, Inc., which is a sports product line of golf visors, neck and headbands using a cross-linked poly acrylic polymer.