Finishing Up

FINISHING UP:
You are now finished with the successful application of Polacrete™. Take care not to allow any traffic or water to get on the surface. You must tape off the area to alert traffic. Be sure automatic sprinklers are turned off before you start. If there is leftover solution in the bucket, you may wish to just cap the bucket, set aside for later disposal. Rinse off the tools and use a wet cloth or sponge to mop up any Polacrete™ drippings that may have been spilled or spread on unintended surfaces. Try to clean as you go (much easier.) Any solution, which may have been spread or spilled on lawns, plants or shrubs, must be sponged off immediately and removed from hand tools. Always leave jobs meticulously clean. DRYING TIME: Allow from one to three hours, depending on the temperature, for the surface to dry before walking on it or saw cutting. Allow at least 24 - 48 hours, again depending on the temperature, for the surface to dry before driving or parking vehicles on the surface. The new Polacrete™ surface will take 1 to 2 weeks to totally cure, much less than freshly poured concrete.